PowerLink - AT2

A 30w PoE Battery Powered WIFI Installer Tool. It supports both 24V and 48v operation.
Availability: 34 in stock
SKU: PowerLink - AT2
$249.99

Specifications:

  • 1.5 inch TFT RGB display
  •  Passive Power Over Ethernet Device, Ubiquiti, Mikrotik, Cambium, Intracom Telecom, etc.
  • Switchable 24V and 48V - 30W PoE
  • Not 802.3at, but power up all devices 802.3at using 8 wires
  • HotSpot WiFi
  • 14000mA/h for charging external devices.
  • 2 Hours at 15W at 45°C
  • Short-circuit, Overload, Temperature, and Low Output Voltage protection.
  • Automated preparation of CPE antenna via Linux script.
  • OpenWrt / Lede, HTML menu, working opkg repository
  • VLAN support
  • Iperf3-s is always active
  • Samba 3, for files and memory sharing, and USB flash memory.
  • Perfect match with App EasyUBNT, Tik-App, ubnt
  • IEEE 802.3 (Pin 4 e 5 +24V, Pin 7 e 8 GND)
  • For old Cambium CPE, you have to create a LAN cable with a reversed power pin.
  • One-year warranty.
  • Independent state:
    • USB Out (Charge/LED)
    • Wi-Fi
    • PoE On
  • Accessory:
    • Hard Case
    • USB Cable
    • Lan Cabl
    • Cambium Swap Cable
  • Weight: 280 grams
  • Dimensions: 86x103x30mm
  • MT7620 chipset 2.4 GHz 
  • Two PCB antennas.
  • WiFi Speed:
    • 2.4 GHz Width 40 MHz =  86 Mbps
    • 2.4 GHz Width 20 MHz = 43 Mbps
  • Optional USB AC Stick
    • AC 5 GHz Width 80 MHz = 292 Mbps
    • AC 5 GHz Width 40 MHz = 150 Mbps
    • AC 5 GHz Width 20 MHz = 72 Mbps

Function of the top click button:

  • One click, Wi-Fi Turn On
  • Fast double click, Wi-Fi Turn Off
  • Long last click button, led light Turn On

Functions of 24V / 48V Button 

  • One click, PoE and WiFi Turn on (For Change this, see at the end of the manual)
  • Long last click button, PoE, and WiFi Turn Off
  • Fast double click, Show Test

Display:

  • Battery level.
  • PoE voltage
  • Ethernet Status ICON
    • switched off - router off
    • full – ethernet at 100 Full Duplex
    • half – Problems with Ethernet cable
    • unplg – Unplugged cable
  • Power delivered
  • config done – When the script succeeds
  • config failed – When the script fails

Reset:

  • Pressed to start up, firmware update
  • Press 30 seconds, factory reset.

Router / Powerbank LEDs:

  • Blue Sx         Ethernet
  • Red               Wi-Fi
  • Yellow           Battery
  • Orange  Dx   Power

Yellow Battery LED:

  • Charging  = Blink
  • End of Charge = On
  • In discharging = ON
  • Low Battery = Blink
Product tags
Customers who bought this item also bought

PowerLink 15W

Battery Powered 24V PoE Out, WiFi Hotspot 2.4 GHz Installer Tool
$218.00

5GHz AC WIFI for PowerLink AT2

This is a 5GHz USB unit for the PowerLink AT2.
$29.99

PowerLink BT 60W

A battery-powered PoE 48V 60W Installer Tool. Designed with/for Tarana.
$434.00

PowerLINK Cambium

PowerLINK Cambium Patch Cable for 8W 24V Battery POE WIFI or 15W 24V Battery POE WIFI Cable for Cambium devices. For swap power, necessary for a 24V Cambium device
$15.00 $10.68

PowerLINK LAN cable

PowerLINK LAN Cable for 8W 24V Battery POE WIFI or 15W 24V Battery POE WIFI. Battery POE only powers up the CPE, Ethernet data goes directly to the PC
$14.99
Existing reviews
Great Product
5
Great Product
Stephen | 1/10/2025 3:45 AM
Was this review helpful? Yes No (0/0)
Only registered users can write reviews