SPI-V2

9Dot SPI-V2

Gigabit PoE Injector with High Power Surge Protection

Surge Protector Injector V2 is a Power over Ethernet injector with integrated surge protection device which belong to the Smart Power Module System Family: a modular system designed to supply Power over Ethernet devices. Each module works independently and ensure the highest level of reliability and security. Through the side selectors you can set the PoE Mode and polarity.

Features:

• Mode Selector: MODE A+B (PoE++) MODE B (4,5 / 7,8) MODE A (1,2 / 3,6)
• Polarity Selector: NORMAL POLARITY: + 4,5 e/o 1,2 | – 7,8 e/o 3,6
• REVERSE POLARITY: – 4,5 e/o 1,2 | + 7,8 e/o 3,6

   

  Specifications SPI-V2

  Electrical
  Operating Voltage	+/- 10 - 60 Volt AC/DC
  Typ Current	1A, 2A (PoE++) - short time maximum current 3A
  Power Connector	2 x 1.31 mm² wires terminal blocks
  Ethernet Connectors	2 x Shielded RJ45 Jacks (LAN / PoE + Data) Screw
  GND Connectors	M4
  Transmission Speeds	10BaseT; 100BaseT; 1000BaseT
  PoE mode	selectable (A, B, A+B, A reverse polarity, B reverse polarity, A+B reverse polarity)
  Led	1 x LED (Status)
  SPD
  Spark over voltage	150 Volts
  Peak Surge Current	15kA
  Modes of Protection	All lines (1-8) Protected (L-L) and (L-G)
  SPD Technology	2 stages: TVS, GDT
  Environmental
  Operating Temperature	-20 °C to +45 °C
  Humidity	5 - 95% non-condensing
  Mechanical
  Dimensions (LxWxD)	87 x 84 x 24 (36 with flange) mm  (3.42" x 3.30" x 0.94" inch)
  Weight	150gr  (0.33 lbs)
  Material	Varnished Iron
  Mounting	Rack mount (with optional Staffa Rack) or DIN Rail (with optional DIN Clip)
  Compliance & Warranty
  RoHS Compliant	Yes
  Certifications	CE - FCC
  Warranty	consult with the nearest distributor